ISOMEDIA, Inc. - Washington's Premier Internet Service Provider

Windows 98 Dialup Settings

•	Telephone number should have the local ISOMEDIA Dial-up number.
•	Connect Using should have your modem selected.
•	Use area code and Dialing Properties should be unchecked.
•	Click Server Types at the top and proceed to the next step.

•	Type of Dial-Up Server should be set to PPP; Internet, Windows NT Server, Windows 98.
•	Enable software compression should be checked.
•	TCP/IP should be checked..
•	Click TCP/IP Settings button at the bottom and proceed to the next step.

•	Server assigned IP address should be selected.
•	Server assigned name server addresses should be selected.
•	Use IP header compression should be checked
•	Use default gateway on remote network should be checked.
•	Finish the changes by clicking the OK button on each window until you reach the Dial-up Networking area.
•	You are now ready to dial-up to ISOMEDIA.